Why Schlage locks are not a good choice

Why Schlage locks are not a good choice

Schlage locks date back to the 1920s when a manufacturer named Walter Schlage invented this lock in San Francisco. The lock was designed exceptionally well according to those times. The lock was invented for various cupboards, drawers and other places where safety was required. It looks similar to an average cylindrical keyhole lock installed in doors and drawers. The design included a three piece design with several complexities. Following is an elaborate discussion on the design which composed of the Schlage lock.

Three-piece manufacturing: the lock composes of three pieces that could be joined together to form a single lock. The lock was easy to use as it was ready for a quick installation after taking it out from the box. The three parts include the low-profile face, the inner mechanism and the back face of the device.

The face: the face was manufactured in such a way that it stays hidden and low profile. The face stays embedded in the door and cannot be grabbed by any wrench. This made it almost impossible for the lock to be picked or tampered with. The face was made with steel to make sure it was sustainable and strong.

Shield: the shield with which the face was installed inside the door, the shield is super versatile and can be adjusted within or taken outside with ease. The shield comprised of a cylindrical shape that was to be inserted within the door handle without breaking or disrupting much of the door.

Bolt: a bolt could be added in this lock for more strength and security. The bolt is added for more protection, when the bolt is added it comes as a protective factor for addition security. With the bolt, the key has to be worked in different ways to finally open the door. The lock becomes stronger and the security improves. The bolt inserted is often made from zinc to ensure proper firmness and security. The bolt cannot be sawed through because of its firmness and strength.

Metallic strikes: thick metallic strikes are attached to the sides of this lock to ensure the lock stays firmly attached on the door. The strikes are also hard to pick and disrupt. The strikes are made stronger with two thick screws for better attachment. These screws are as long as three inches. This is because the security and firmness of the lock will be guaranteed with proper adjustment of the lock. The screws make sure the lock is intact with the door and everything is safe inside.

Rounded strikes: the strike metallic places on either sides of the lock are rounded rectangles. The shape makes it easier for the screws to remain attached and embedded within the door. Additional two screws are embedded within these plates to increase security and safety.

Backset: the backset is even stronger than the front hidden face. The backset allows easy adjustability. Furthermore, it has been manufactured in such a way to ensure no adjustability required after installation. The backset can be attached easily within the door. The backset is made with code compliancy. It can be opened and adjusted back in the door with ease without making much effort. The sustenance can also be assured due to this backset. The design of the backset is referred to as the helical design which is easy to install in the door and requires no professional adjustability.

While you now know what kind of a design the Schlage lock has, you also need to know why it is not a good choice to have it installed today. Our professional Locksmith Houston has the right advice just to make sure your security concerns are met. Following are some reasons why you would know Schlage locks aren’t the right choice for your safety:

  • Old: the lock dates back to 1920s. Despite the amazing mechanism of the lock, the lock is old and cannot be relied on today. The lock will only be found in a few areas and its guarantee will not be given. Therefore, there will be no guarantee of the reliability and adjustability of the lock in your doors and cabinets.
  • Cannot be fixed: while the bolts fixed inside the locks are extremely safe and securing, the lock becomes almost impossible to break the lock in case it goes wary. According to climatic conditions and other pressures, locks often go out of use. If you have this lock installed, it would be nearly impossible to break the bolt inside if the door is locked and jammed. You might have to ask our professional Locksmith Houston to break the door to disable the lock.
  • Hidden face: while the face or the front of the lock is nearly hidden and embedded within the door, the lock cannot easily be taken off if it rusts or jams inside the door. The hidden face cannot be taken out with the help of a wrench and cannot be pulled out easily if it gets stuck.
  • Might fall off: since the lock dates back decades ago, there is a chance that the lock might fall off without even applying pressure to it. This makes your possessions come under security threats. In case you want to replace this lock, it might not be easy to disable and take it out without damaging your door.

The Schlage locks were manufactured as an amazing piece of technology for protection and security. However, they date back to the 20s and therefore making it impossible for us to use them today. If you have a similar lock installed in your house, you need to call our Locksmith Houston to have it replaced with a new locking system right now. This is to avoid further concerns regarding security. If the lock gets jammed and sticks inside the door, you might have to break the door in order to take it out!