2007 Mazda CX-7 Remote Programming instructions
Shear These Programming Instructions
These instructions are not for the smart key system.
1: Open driver side door and leave open.
2: Lock and Unlock the drivers door using the power door lock switch on the door
3: Insert key into the ignition.
4: Turn Key to ON position and return to Lock (off) position. Do this 3 times within
10 seconds. LEAVE key in the ignition in Lock (off) position.
5: Close and open the drivers door 3 times. Leave door open after this step
6: ECU should respond by locking and unlocking the doors once.
7: Press any button on remote #1 twice. ECU responds by locking and unlocking
the car doors.
8: Additional remotes, repeat Step 7 for up to 3 remotes total.
9: Remove the key from the ignition and the ECU will respond a final time with a
series (about 4) of door locks and unlocks.