Vehicle Make

2007 Ford Focus Remote Programming instructions

Need A Refurbished Key Come Check Out Our
Refurbished On-line Key Store

visit our store

Shear These Programming Instructions

Obtain all remote transmitters for this vehicle.

  1. Fasten seat belts and close all doors.
  2. Turn ignition from OFF to RUN 4 times within 6 seconds, with the 4th time ending in RUN. (Off is the position where you can remove your key, RUN is the position just shy of starting your car.)
  3. Turn ignition to OFF. Acoustic signal will sound to confirm programming mode.
  4. Within 10 seconds, press and hold any button on the first keyless remote. Wait for acoustic sound and warning lamp to flash (confirming programming) then release button on remote. Wait 2 seconds but within 10 seconds Repeat step 4. for all other remotes. If you only have one remote then continue to step 5.
  5. Turn ignition to RUN or wait 10 seconds to end programming mode.