Vehicle Make

2006 Mercury Mountaineer Remote Programming instructions

Need A Refurbished Key Come Check Out Our
Refurbished On-line Key Store

visit our store

Shear These Programming Instructions



1. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN.
Door locks will cycle to confirm programming mode.

2. Within 20 seconds press any button on first keyless remote. Door locks will cycle to
confirm programming.

3. Within 20 seconds, press any button on second keyless remote. Door locks will cycle
again to confirm programming.

4. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

Disclaimer