Vehicle Make

2005 Kia Sedona Remote Programming instructions

Need A New Key Come Check Out Our
BRAND NEW ONLINE KEY STORE

visit our store

Shear These Programming Instructions



This is the layout of jumper pins.

1 2 3 4
5 6 7 8 9 10 11 12
13 14 15 16 17 18 19 20

ONLY TWO REMOTES CAN BE PROGRAMMED TO THIS VEHICLE.

1. Open Hood and locate diagnostic connector near battery

2. Jump pin 5 to pin 17 with a suitable jumper wire.

3. Turn ignition to the ON position. ( DO NOT START)

4. Press LOCK button of first remote two times.

5. Press LOCK button on second remote two times. (if applicable).

5. Turn ignition OFF and remove key.

6. Disconnect jumper from diagnostic connector.

7. Check for lock and unlock operation. Horn will sound when locking.

Disclaimer