Vehicle Make

2002 Honda Accord Remote Programming instructions

Need A New Key Come Check Out Our
BRAND NEW ONLINE KEY STORE

visit our store

Shear These Programming Instructions



Note:
Entering the programming mode cancels all learned keyless remotes, so none of the previously programmed
remotes will work. You must reprogram all of the keyless remotes once you are in the programming mode.

You must complete each step within 5 seconds of the previous step to keep the system from exiting
the programming mode.

1. Turn ignition switch to ON (II)

2. Press the LOCK or UNOCK button on one of the remotes. (An unprogrammed remote can be used for this
step.)

3. Turn ignition switch to LOCK (0)

4. Repeat steps 1, 2 and 3 two more times using the same keyless remote used in step 2

5. Turn the ignition switch to ON (II)

6. Press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you
are in programming mode.

7. Press the LOCK or UNLOCK button on each remote you want to program. Make sure door locks cycle
after you push each remote button to confirm system has accepted the remote.

8. Turn the igniton switch to LOCK (0) to exit programming mode.

9. Test remote(s)

Disclaimer