2001 Ford Explorer Sport Trac Remote Programming instructions
Need A Refurbished Key Come Check Out Our
Refurbished On-line Key Store
Shear These Programming Instructions
1. Close all doors and then open drivers door and press the UNLOCK button on drivers
door panel while door is open and insert key in ignition.
2. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in
RUN. Door locks will cycle to confirm programming mode.
3. Within 20 seconds press any button on first keyless remote. Door locks will cycle
to confirm programming.
4. Within 20 seconds, press any button on second keyless remote. Door locks will
cycle again to confirm programming.
5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.