Vehicle Make

2001 Chevrolet Suburban Remote Programming instructions

Need A New Key Come Check Out Our
BRAND NEW ONLINE KEY STORE

visit our store

Shear These Programming Instructions



1. Close all vehicle doors.

2. Insert the key into the ignition.

3. Hold down the power UNLOCK button on the driver’s door
panel-continue to hold down until instructed to release in
step 9.

4. Perform steps 5 through 8 in fairly rapid succession.

5. Turn the ignition switch to the ON position (as far as you
can go without starting the engine).

6. Turn the ignition switch to the OFF position.

7. Turn the ignition switch to the ON position.

8. Turn the ignition switch to the OFF position.

9. Release the power unlock button on the door panel. The
vehicle will lock and unlock the doors automatically.

10. Hold down the LOCK and UNLOCK buttons on the
transmitter simultaneously until the door locks and unlocks.
This step may take up to 30 seconds.

11. Repeat step 10 NOW for each additional transmitter
(including any existing transmitters).

12. Turn the ignition switch to the ON position in order to exit
the transmitter programming mode.

Disclaimer