Vehicle Make

1997 Pontiac Trans Sport Remote Programming instructions

Need A New Key Come Check Out Our
BRAND NEW ONLINE KEY STORE

visit our store

Shear These Programming Instructions



1. Remove key from ignition switch.

2. Remove the BCM PRGRM fuse, from fuse box ( On some vehicles
you need to remove the MALL PGM fuse instead)

3. Close all doors.

4. Turn ignition switch to ACC.

5. Within 1 second turn the ignition switch to OFF then back to ACC

6. Open and close drivers door.

7. A chime will sound indicating you are in programming mode.

8. Press and hold the LOCK and UNLOCK buttons together until chime sounds twice,
about 14 seconds.

9. Repeat step 8 for any additional remotes.

10. Remove key from ignition and replace BCM PRGRM or MALL PGM fuse.

11. Test remotes.

Disclaimer