Vehicle Make

1997 Mercury Villager Remote Programming instructions

Need A New Key Come Check Out Our
BRAND NEW ONLINE KEY STORE

visit our store

Shear These Programming Instructions



1. Enter vehicle, close and lock all doors using power lock switch on drivers door.

2. Insert and remove (do not turn) key from ignition at least 6 times within 10 seconds.
Tail lamps will flash to indicate original code has been erased.

3. Insert and turn key to ACC position.

4. Press LOCK on first keyless remote. Tail lamps will flash to confirm programming.

5. To add additional remotes, unlock then lock the doors using power lock
switch on drivers door.

6. Press LOCK button on second keyless remote. Tail lamps will flash to confirm
programming.

7. Open drivers door, turn ignition to OFF.

Disclaimer