Vehicle Make

1997 GMC Sonoma Remote Programming instructions

Need A New Key Come Check Out Our
BRAND NEW ONLINE KEY STORE

visit our store

Shear These Programming Instructions



1. Locate the red two wired programming connector located near the central
locking control module. behind LH Lower instrument panel

2. Jump Programming connector terminals.

3. System should now lock and unlock doors to indicate vehicle has entered
programming mode.

4. Press any button on keyless remote once. System should now lock and unlcok
doors indicating the keyless remote has been programmed.

5. Repeat step 4 to program other remote.

6. Remove jumper wire from programming connector to exit programming mode.

7. Test Remote(s)

Disclaimer