Why do locks fall off?

Why do locks fall off?

We use different kinds of locks to protect our belongings and valuable possessions. Padlocks are among the most commonly used locks on our house and office doors. It cannot be denied how important using locks are. The following are some reasons why you would be using locks in your home or offices:

  • The increasing crime rate internationally
  • You want to protect your important documents and legal books from other possession
  • You want to make sure your valuable possessions are out of reach
  • You want to make sure you’re your precious jewels and money are out of reach from burglars and thieves
  • You want to make sure your precious documents and jewels are out of reach from climatic conditions and external pressures

As there are different reasons why you would require locks for protection, there are different kinds of locks you would use. You can concern your Locksmith Houston for more advice. Among the different kinds of locks the most commonly used is the padlock. Padlocks can be used to lock the doors and cabinets from the outside without having them attached to anything else. It works as an independent external source that can be locked outside of the door handle or cabinet handle. This lock is also used to lock the handles of a gate. Padlock is made from steel and other metals. It can be of two different types: combination and keys. The key padlock is most often used. It can be opened with a simple key by twisting and turning. The combination padlock opens by combining two keys and twisting them together. There are a number of reasons why a padlock might fall off. Among the top reasons is that it has been tampered with. No matter which padlock you have, it is easier to pick than other locking systems. If it is picked, it can easily fall off from your safe possession. On the other hand, padlocks might also rust due to external pressure and water exposure. Therefore, the padlock works best if it is safe from external pressures and water.

Another kind of lock you might use is deadbolt. Deadbolts are installed inside the door knobs and locks. There are three basic kinds of deadbolts that can be used. These include: single, double and thumb-turn. These different kinds of deadbolts can increase the security of your possessions. These locks also require keys to open and close them. They are difficult to pick than simple padlocks. The reason why this deadbolt might fall off is its exposure to external force and water. While the deadbolts resist rusting, they can be picked by top equipment and expert burglars. However, the deadbolt might fall off if the keys break inside the keyhole of the lock.

<div class=”g-post” data-href=”https://plus.google.com/+Keys4carsUsCar-Key-Replacement/posts/6JSCY4n5Xk1″></div>

Knob lock is another lock frequently used in residential and commercial buildings. This lock is installed inside the door knob. It opens and locks by mere twisting of the lock like structure present outside the knob. It requires no key or other external force to lock or open. This lock only gets installed in the door knobs. One of the reasons why this lock might fall off is because it is easy to pick and gets disrupted by force and pressure. When the knob is twisted with more pressure than required, the lock might completely fall off. Also, this kind of a lock is also prone to get rusted if it is exposed to wind and water.

Lever handle locks can also be used to protect your valuables inside rooms and cupboards. These locks are also installed within the doors, instead of door knobs. The lever acts as the door knob handle and can be twisted to open the door. However, the lever has a lock inside it. This lock can only be opened by the help of a key. These locks most commonly fall off. When they are twisted or turned down with more pressure and force than required, they can easily break off from the door. Another reason for their falling off might be tampering. When a burglar tries to pick this lock, he might break the entire system of locking inside the lock, causing it to fall off completely.

Rim latch locks are often used within apartments and cabinets to secure inside possessions. These locks are installed within dark mounted structures. When the black mount is placed instead of the door handle or knob, the lock is then installed inside it. The lock can be opened by mere twisting of the knob like structure on it. Therefore, it is easy to open and lock it without requiring a key or special combination. This lock might easily fall off due to excessive turning and twisting of the knob like structure. This lock does not withstand a lot of pressure or force. Therefore, it is easy to break off and tamper with.

Key in cylindrical knob is another type of lock used inside doors and cabinets. The cylinder structure is installed within the cabinet, cupboard or door that needs to be locked. When the cylinder is installed, a special key is appointed with the lock. The lock follows a complex mechanism for locking the possessions inside. With the help of the key, the lock can be opened and closed. This lock might fall off due to the breaking of the key inside the key hole or if it has been tampered with.

Above mentioned were some locks and the reasons why they might fall off without you noticing it. The best thing to do is analyze why they might fall off and get the one installed that would secure your possessions for the longest time possible. You need to evaluate what kind of possessions you need to protect and which lock would protect them in the best possible method. Have a look at the kind of locks and concern a Locksmith Houston regarding your possessions.

Falcon Emergency Exit Device

Falcon Emergency Exit Device

Emergency exit is a structure or device that can be installed in buildings for emergency purposes. These emergency situations include: fire alarms, smoke, release of toxins in the air, release of radioactive chemicals in the environment etc. The nature of emergency depends upon the kind of building it is. The emergency exit is designed for people who are present in the building. These people would have to rush out of the building. The emergency exit allows the building to be evacuated as soon as possible in case of emergencies. This allows people to find the best exit instead of rushing through doors that might be locked. Other purposes of emergency exit devices can be unlocking of all the doors and gates that have been installed in a building. Falcon emergency exit device is used for that purpose. You can hire a professional locksmith Houston to have this device installed in order to evacuate commercial or residential buildings under emergency situations.

With the growing security concerns and emergency situations, we ought to have emergency exit devices installed in commercial as well as residential buildings. Among the best devices to be installed in buildings, Falcon emergency exit devices can be used. The Falcon emergency exit device can be installed in doors and garage gates for emergency purposes. The reason such devices are installed are for urgent exits. There are a number of situations which might lead to installation of such devices. Following are some reasons which require such emergency devices to be installed:

Fire alarms: in case the fire alarm sets out due to smoke or fire in a building, the building is supposed to be evacuated instantly. The only way of doing so is by opening all the doors and allowing the people to rush outside. However, in case of panic and emergency, it is not easy to open all locks and deadbolts immediately. Therefore, it becomes necessary to install a security device that opens and closes immediately. The Falcon emergency exit device can be installed with ease to open all your doors and gates instantly in case of emergency. If the fire hits out or some smoke emits from the building, the device can be used to open all the doors and enable emergency exit. This way, everyone can rush out without opening several door locks and deadbolts. Our professionally trained and skilled Locksmith Houston is always ready at emergency notice to help tackle fire and evacuate buildings. However, it is always better to have the emergency exit devices installed for better evacuation of the buildings in case of natural or human error crisis.

Natural hazards: there are various natural hazards which might inflict damage inside the buildings. These natural hazards include floods, earthquakes and storms. In such a case, the building is prone to collapse. Not only that, the people inside the building might be under danger. Therefore, the building must be evacuated instantly. In such a case, the Falcon emergency exit device is the best solution. This device enables every door to be unlocked and every bolt to be opened. By installing this single device, every building can be easily evacuated with a single mechanism. Whether the flood hits the buildings or the earthquake causes jerks to shake the entire building, this device can allow emergency exit at all times. With a single push of a button or level pulling, the emergency exit device can disable all locks found in the particular building enabling people to rush outside without creating more panic.

The benefits of having Falcon emergency exit device installed have been stated. Further, we need to analyze where the emergency exit device can be installed. Oftentimes, the device is installed within the main circuit room of the building. If the building is commercial, the main circuit room is the one that features all the buildings’ security essentials and electricity supply devices. This room will feature the Falcon emergency exit device. In case of emergency, the person in-charge will push a single button which will allow all doors to be unlocked for the building to the evacuated. This is the sole purpose of the emergency exit device: to evacuate buildings immediately without causing more panic.

Commercial buildings where these Falcon emergency exit devices are most commonly found include:

  • Fire departments: where there is equipment which might cause fuse in the electrical systems
  • Hospitals: where there are medicinal drugs which might cause trouble in breathing or other contact diseases that might lead to deaths and other serious health concerns
  • Museums: where there are chances of fire alarms and high reactivity due to different nature of paints and colors present
  • Schools: where there are different laboratories which might lead to fire and other instabilities in the ambiance
  • Offices and other commercial buildings: where there are cleaning agents containing various chemicals and dangerous ingredients
  • Search laboratories: where there are chances of highly reactive and explosive chemicals to be found. These buildings require more than one emergency exit devices to make sure every lock is disabled in the time of need
  • Libraries: where fire might hit out due to climatic conditions or other emergencies

These are only a few buildings where emergency exit devices are installed and required. According to the emergency situations and their nature in these buildings, different levels of security devices can be used. For example, the hospitals and schools might have intense security levels while those at museums and libraries may be less intense. The nature of security level depends upon the ratio of human life found in the buildings. However, it can be noted how important installing such emergency exit devices is, especially in commercial buildings. Not only will these devices enable proper evacuation in the least time possible, they will ensure care of those people who step out of the building in emergency crisis. Therefore, installing such emergency exit devices must be mandatory in commercial buildings.

Why Schlage locks are not a good choice

Why Schlage locks are not a good choice

Schlage locks date back to the 1920s when a manufacturer named Walter Schlage invented this lock in San Francisco. The lock was designed exceptionally well according to those times. The lock was invented for various cupboards, drawers and other places where safety was required. It looks similar to an average cylindrical keyhole lock installed in doors and drawers. The design included a three piece design with several complexities. Following is an elaborate discussion on the design which composed of the Schlage lock.

Three-piece manufacturing: the lock composes of three pieces that could be joined together to form a single lock. The lock was easy to use as it was ready for a quick installation after taking it out from the box. The three parts include the low-profile face, the inner mechanism and the back face of the device.

The face: the face was manufactured in such a way that it stays hidden and low profile. The face stays embedded in the door and cannot be grabbed by any wrench. This made it almost impossible for the lock to be picked or tampered with. The face was made with steel to make sure it was sustainable and strong.

Shield: the shield with which the face was installed inside the door, the shield is super versatile and can be adjusted within or taken outside with ease. The shield comprised of a cylindrical shape that was to be inserted within the door handle without breaking or disrupting much of the door.

Bolt: a bolt could be added in this lock for more strength and security. The bolt is added for more protection, when the bolt is added it comes as a protective factor for addition security. With the bolt, the key has to be worked in different ways to finally open the door. The lock becomes stronger and the security improves. The bolt inserted is often made from zinc to ensure proper firmness and security. The bolt cannot be sawed through because of its firmness and strength.

Metallic strikes: thick metallic strikes are attached to the sides of this lock to ensure the lock stays firmly attached on the door. The strikes are also hard to pick and disrupt. The strikes are made stronger with two thick screws for better attachment. These screws are as long as three inches. This is because the security and firmness of the lock will be guaranteed with proper adjustment of the lock. The screws make sure the lock is intact with the door and everything is safe inside.

Rounded strikes: the strike metallic places on either sides of the lock are rounded rectangles. The shape makes it easier for the screws to remain attached and embedded within the door. Additional two screws are embedded within these plates to increase security and safety.

Backset: the backset is even stronger than the front hidden face. The backset allows easy adjustability. Furthermore, it has been manufactured in such a way to ensure no adjustability required after installation. The backset can be attached easily within the door. The backset is made with code compliancy. It can be opened and adjusted back in the door with ease without making much effort. The sustenance can also be assured due to this backset. The design of the backset is referred to as the helical design which is easy to install in the door and requires no professional adjustability.

While you now know what kind of a design the Schlage lock has, you also need to know why it is not a good choice to have it installed today. Our professional Locksmith Houston has the right advice just to make sure your security concerns are met. Following are some reasons why you would know Schlage locks aren’t the right choice for your safety:

  • Old: the lock dates back to 1920s. Despite the amazing mechanism of the lock, the lock is old and cannot be relied on today. The lock will only be found in a few areas and its guarantee will not be given. Therefore, there will be no guarantee of the reliability and adjustability of the lock in your doors and cabinets.
  • Cannot be fixed: while the bolts fixed inside the locks are extremely safe and securing, the lock becomes almost impossible to break the lock in case it goes wary. According to climatic conditions and other pressures, locks often go out of use. If you have this lock installed, it would be nearly impossible to break the bolt inside if the door is locked and jammed. You might have to ask our professional Locksmith Houston to break the door to disable the lock.
  • Hidden face: while the face or the front of the lock is nearly hidden and embedded within the door, the lock cannot easily be taken off if it rusts or jams inside the door. The hidden face cannot be taken out with the help of a wrench and cannot be pulled out easily if it gets stuck.
  • Might fall off: since the lock dates back decades ago, there is a chance that the lock might fall off without even applying pressure to it. This makes your possessions come under security threats. In case you want to replace this lock, it might not be easy to disable and take it out without damaging your door.

The Schlage locks were manufactured as an amazing piece of technology for protection and security. However, they date back to the 20s and therefore making it impossible for us to use them today. If you have a similar lock installed in your house, you need to call our Locksmith Houston to have it replaced with a new locking system right now. This is to avoid further concerns regarding security. If the lock gets jammed and sticks inside the door, you might have to break the door in order to take it out!